Paints & Coatings
ASDAFLOOR — two-component epoxy primer, 20 kgMin. order: 1 set
Tashkent Region

Two-component epoxy compound for thick, seamless protective floor coatings over indoor concrete or cement screeds. Recommended for workshops, warehouses, retail and exhibition areas, food, pharmaceutical and chemical facilities, educational and healthcare buildings, sports facilities, covered parking and garages. Smooth or textured finishes are possible, with colors selected from the RAL chart. The 25 kg kit contains 21 kg of A and 4 kg of B, mixed 5.25:1 by mass. This is the finish coating for a prepared and primed substrate, distinct from the epoxy primer. For indoor use on dry, properly prepared concrete. Do not apply over rising damp, hydrostatic pressure, condensation, contamination, weak or delaminating concrete. Outdoor exposure, continuous sunlight, freeze–thaw conditions, hot steam, pressure washing or permanent water contact require specific manufacturer approval. Protect from moisture and condensation until fully cured. Read the complete product-specific TDS before use. Premix the components separately. Mix component A until homogeneous, then add B at the specified ratio and mix for 2–3 minutes. Transfer to a clean container and mix for another minute; total mixing time must not exceed 7 minutes. Do not use residue left on the walls or bottom of the original container. Apply immediately after mixing. Provide ventilation and personal protective equipment; keep open flames and welding away.
Paints & Coatings
Request a quotation
Final price and delivery terms are confirmed in your quotation.
Minimum order: 1 set
One request. Our team handles supplier coordination.
Request only · No online payment