
Paints & Coatings
ASDAFLOOR — two-component epoxy primer, 20 kg
ASDAFLOOR · PROMXIM IMPEXTransparent, low-viscosity, two-component primer for priming and leveling concrete beneath self-leveling epoxy and polyurethane floors. Penetrates concrete pores, seals micropores and improves adhesion of the subsequent coating. The 20 kg kit contains 15 kg of A and 5 kg of B, mixed 3:1 by mass. This primer is separate from the colored finish coating. Recoat only after the preceding layer has fully cured. The TDS states consumption of 0.15–0.4 kg/m², with 150–250 g/m² for the first coat and 100–150 g/m² for the second. For indoor use on dry, properly prepared concrete. Do not apply over rising damp, hydrostatic pressure, condensation, contamination, weak or delaminating concrete. Outdoor exposure, continuous sunlight, freeze–thaw conditions, hot steam, pressure washing or permanent water contact require specific manufacturer approval. Protect from moisture and condensation until fully cured. Read the complete product-specific TDS before use. Premix the components separately. Mix component A until homogeneous, then add B at the specified ratio and mix for 2–3 minutes. Transfer to a clean container and mix for another minute; total mixing time must not exceed 7 minutes. Do not use residue left on the walls or bottom of the original container. Apply immediately after mixing. Provide ventilation and personal protective equipment; keep open flames and welding away.
- Kit contents
- A: 15 kg; B: 5 kg; total: 20 kg
- A:B mixing ratio by mass
- 3:1
- Appearance
- Transparent low-viscosity liquid





